Category: Technical Posts
Search Technical Posts
-
AB-003: Driving Linear Resonance Vibration Actuators
Published on
Most vibrating motors in our product range are DC Eccentric Rotating Mass (ERM) motors which are produced with an offset
View Post
-
AB-005: Electromagnetic Compatibility For Vibe Motors
Published on
Electromagnetic interference (EMI) is the radiation or induction of electromagnetic noise on a system. DC motors are a common source
View Post
-
AB-001: Discrete Driver Circuits For Vibration Motors
Published on
This bulletin covers the circuitry required to drive vibration motors from a high impedance signal source (for example an output
View Post
-
Haptic Feedback Applications With Vibration Motors
Published on
Haptic feedback and vibration alerting are different but commonly confused. To understand this difference in more detail, take a look
View Post
-
AB-002: Discrete H-Bridge For Enhanced Vibration Control
Published on
This bulletin covers some more advanced circuitry that is useful if we need better control of the vibration motors we’re
View Post
-
Encapsulated And Enclosed Vibration Motors
Published on
Encapsulated vibration motors are designed to be over-moulded with low temperature/pressure plastics to make them fully watertight, or seal them
View Post
-
Handheld And Mobility Applications With Vibration Motors
Published on
Both haptic feedback and vibration alerting technologies have important roles in handheld equipment. They are easily implemented in a number
View Post
-
Eccentric Rotating Mass Vibration Motors – ERMs
Published on
Eccentric Rotating Mass vibration motors, also commonly known as ERMs or pager motors, make up our main product lines and
View Post
-
Dura Vibe™ – Brushless Vibration Motors
Published on
Dura Vibe™ Brushless Vibration Motors Our Dura Vibe™ range is a series of brushless vibration motors which are longer lasting
View Post
-
Coin Vibration Motors
Published on
Precision Microdrives currently produces coin vibration motors, also known as shaftless or pancake vibrator motors, generally in Ø8mm - Ø12mm
View Post