Your Order Cart is empty.

10mm Vibration Motor - 13mm Type

Model
310-114
Body Diameter Body Length Ecc. Weight Radius Ecc. Weight Length Shaft Orientation Rated Operating Voltage Rated Vibration Speed Typical Rated Operating Current Typical Norm. Amplitude
10 mm 12.6 mm 2.9 mm 4.5 mm Inline 3 V 12,000 rpm 250 mA 6 G

Physical Specification

Parameter Specification Condition
Body Diameter 10 mm Max body diameter or max face dimension where non-circular
Body Length 12.6 mm Excl. shafts, leads and terminals
Unit Weight 3.3 g
No. of Output Shafts 1
Ecc. Weight Radius 2.9 mm Radius from shaft for non-cylindrical weights
Ecc. Weight Length 4.5 mm
Shaft Orientation Inline

Construction Specification

Parameter Specification Condition
Motor Construction Iron Core
Commutation Precious Metal Brush
No. of Poles 3
Bearing Type Sintered Bronze

Operational Specification

Parameter Specification Condition
Rated Operating Voltage 3 V
Rated Vibration Speed 12,000 rpm At rated voltage using the inertial test load
Max. Rated Operating Current 400 mA At rated voltage using the inertial test load
Rated Inertial Test Load 250 g Mass of rated load standard test sled
Max. Start Voltage 1.5 V Certified starting voltage. Measured at no load, where applicable
Min. Vibration Amplitude 1.7 G Peak-to-peak value at rated voltage using the inertial test load
Max. Operating Voltage 3.5 V
Max. Start Current 700 mA At rated voltage
Min. Insulation Resistance 1 MOhm At 50V DC between motor terminal and case

Typical Performance Characteristics

Parameter Specification Condition
Typical Rated Load Power Consumption 750 mW At rated voltage and load
Typical Rated Operating Current 250 mA At rated voltage using the inertial test load
Typical Vibration Amplitude 2.4 G Peak-to-peak value at rated voltage using the inertial test load
Typical Start Current 560 mA At rated voltage
Typical Vibration Efficiency 3.2 G/W At rated voltage using the inertial test load
Typical Norm. Amplitude 6 G Peak-to-peak vibration amplitude normalised by the inertial test load at rated voltage
Typical Start Voltage 0.6 V Measured at no load, where applicable
Typical Terminal Resistance 4.8 Ohm
Typical Terminal Inductance 600 uH

Typical Haptic Characteristics

Parameter Specification Condition
Typical Lag Time 14 ms At rated voltage using the inertial test load
Typical Rise Time 40 ms At rated voltage using the inertial test load
Typical Stop Time 63 ms At rated voltage using the inertial test load
Typical Active Brake Time 25 ms Time taken from steady-state to 0.04 G under inverse polarity at max. voltage

Typical Durability Characteristics

Parameter Specification Condition
Typical Min. Counterweight Pullout 9.8 N
Typical Max. Mech. Noise 65 dB(A)
Mean Time to Failure 558 hours Typical rated lifetime. Actual operating life depends on application

Environmental Characteristics

Parameter Specification Condition
Max. Operating Temp. 60 Deg.C
Min. Operating Temp. -10 Deg.C
Max. Storage & Transportation Temp. 70 Deg.C
Min. Storage & Transportation Temp. -30 Deg.C

Typical Packing Conditions

Parameter Specification Condition
Carton Type Boxed Trays
Currently Available Stock for Samples
559
Pricing for Sample Orders (GBP):
Qty Break Unit Price
1+ £4.80
10+ £4.62
20+ £4.44
50+ £4.01

Please contact us for a quotation for production quantities, customizations and integration.