Your Order Cart is empty.

10mm Vibration Motor - 3mm Type

Model
310-003
Body Diameter Body Length Rated Operating Voltage Rated Vibration Speed Typical Rated Operating Current Typical Norm. Amplitude
10 mm 3.4 mm 1.5 V 10,000 rpm 40 mA 0.9 G

Physical Specification

Parameter Specification Condition
Body Diameter 10 mm Max body diameter or max face dimension where non-circular
Body Length 3.4 mm Excl. shafts, leads and terminals
Unit Weight 1.1 g

Construction Specification

Parameter Specification Condition
Motor Construction Flat Coreless
Commutation Precious Metal Brush
No. of Poles 6
Bearing Type Sintered Bronze

Leads & Connectors Specification

Parameter Specification Condition
Lead Length 100 mm Lead lengths defined as total length or between motor and connector
Lead Strip Length 1.5 mm
Lead Wire Gauge 32 AWG
Lead Configuration Straight

Operational Specification

Parameter Specification Condition
Rated Operating Voltage 1.5 V
Rated Vibration Speed 10,000 rpm At rated voltage using the inertial test load
Max. Rated Operating Current 50 mA At rated voltage using the inertial test load
Rated Inertial Test Load 100 g Mass of rated load standard test sled
Max. Start Voltage 0.9 V Certified starting voltage. Measured at no load, where applicable
Min. Vibration Amplitude 0.6 G Peak-to-peak value at rated voltage using the inertial test load
Max. Operating Voltage 1.8 V
Max. Start Current 120 mA At rated voltage
Min. Insulation Resistance 10 MOhm At 50V DC between motor terminal and case

Typical Performance Characteristics

Parameter Specification Condition
Typical Rated Load Power Consumption 60 mW At rated voltage and load
Typical Rated Operating Current 40 mA At rated voltage using the inertial test load
Typical Vibration Amplitude 0.9 G Peak-to-peak value at rated voltage using the inertial test load
Typical Start Current 80 mA At rated voltage
Typical Vibration Efficiency 15 G/W At rated voltage using the inertial test load
Typical Norm. Amplitude 0.9 G Peak-to-peak vibration amplitude normalised by the inertial test load at rated voltage
Typical Start Voltage 0.8 V Measured at no load, where applicable
Typical Terminal Resistance 35 Ohm
Typical Terminal Inductance 260 uH

Typical Haptic Characteristics

Parameter Specification Condition
Typical Lag Time 66 ms At rated voltage using the inertial test load
Typical Rise Time 142 ms At rated voltage using the inertial test load
Typical Stop Time 185 ms At rated voltage using the inertial test load
Typical Active Brake Time 61 ms Time taken from steady-state to 0.04 G under inverse polarity at max. voltage

Environmental Characteristics

Parameter Specification Condition
Max. Operating Temp. 60 Deg.C
Min. Operating Temp. -20 Deg.C
Max. Storage & Transportation Temp. 70 Deg.C
Min. Storage & Transportation Temp. -30 Deg.C

Typical Packing Conditions

Parameter Specification Condition
Carton Type Boxed Trays
Currently Available Stock for Samples
509
Pricing for Sample Orders (GBP):
Qty Break Unit Price
1+ £4.20
10+ £4.12
20+ £4.04
50+ £3.82

Please contact us for a quotation for production quantities, customizations and integration.